This machine has been designed for brushing, finishing and polishing leather goods and footwear.
This is the single-head variant designed to take up very little space. From the panel you can operate the arm (available both in the standard version with two diameters), modify the speeds (from 0 to 4000 rpm. / min) and control the aspirator (741-VRSA version only). Available in the head only version, with support (741-VRS) and with support and aspirator (741-VRSA).
Technical Features Mod. 741-VR
1 Motor 0.5 HP rpm 2800
Managed by inverter up to 4000 rpm
Overall dimensions 54 x 40 x 42 cm
Voltage Volt 220 Single-phase
Net weight Kg 25 approximately
Version with support Mod. 741-VRS
Overall dimensions cm 75 x 57 x 132 cm
Voltage Volt 220 Single-phase
Net weight Kg 60 about
Version with support and aspirator Mod. 741-VRSA
Centrifugal aspirator HP 0,5
Overall dimensions cm 85 x 90 x 132 cm
Voltage Volt 220 Single-phase
Net weight Kg 80 approximately